Activity by Clock Time
MacGui: Rework how we get encode and queue done alerts.
- Add separate checkbox for system alert sound in Preferences > General > When Done (previously it was automatic only when "When Done" included the alert panel")
- System alert sound will play whenever the specified Alert When Done event occurs if its checked (this includes the Growl alerts which come up as encodes roll off of the queue) which addresses the sound part of this forum thread http://forum.handbrake.fr/viewtopic.php?f=22&t=17347#p80456. Thanks to BradleyS for the suggestion.
- Also fix an issue introduced in the multi instance queue commmit (ref 3450) where the Alert Window would come up one encode too early instead of at the end of the queue if you use the alert window for when queue is completed. This addresses forum thread http://forum.handbrake.fr/viewtopic.php?f=12&t=17367 thanks to noved for picking up on it.
- Get rid of a touch of commented code from rev 3450 which is worthless.
254 lines of code changed in:
MacGui: Fix issue where queue was being reloaded showing already completed encodes at launch. Borked in svn rev 3443.
57 lines of code changed in:
x264 bump from r1677 to r1681
1 lines of code changed in:
MacGui: Fix how we get the current instances pid number since NSRunningApplication is a 10.6 only api and therefore breaks 10.5 compatibility (which also borked the nightly build).
- Many thanks to ritsuka for pointing this out.
- Also adds ability to get the full path to each running instance if we need it in the future.
- Note: Adds additional logging to hbInstances which can be removed when we see fit. But for now imho could be useful since we are early in multi-instance queue encoding.
39 lines of code changed in:
x264: Add "--disable-swscale" to the config as it borked the nightly build server and is not used for libx264 anyway, only applies to the x264 cli which we do not use.
1 lines of code changed in:
MacGui: Initial implementation of new queue sync code which allows multi-instance encoding.
This allows more than one instances of HandBrake.app to run off of the same queue file.
In the case of multi-instance use these changes occur in the queue window:
- The delete icon for a given queue item does not exist in the queue window if another instance is doing the encoding.
- The encoding icon does not spin if another instance is doing the encoding.
- As before if the queue window is for the instance doing the encoding on that item it will be animated and "spins".
- The queue window status readout now also includes the output file name for the file being encoded for that instance.
Known bugs:
- Drag and Drop queue reordering is somwehat borked. Doesn't corrupt queue but can not allow a drop in some instances.
- I have tested this over 20 multi instance encodes and not once had an issue, but anytime more than one instance is writing to the same external file anything can happen. Beware!
- The session activity log will of course be full of activity log info from all instances in a multi instance scenario. Individual encode logs are unaffected.
363 lines of code changed in:
x264 bump from r1675 to r1677
- Fixes compilation with shared ffmpeg libs
- Fixes PCM bug.
1 lines of code changed in:
x264 bump from r1666 to r1675
- Various bug fixes and enhancements.
1 lines of code changed in:
Bump x264 from r1659 to r1666
- Various enhancements and bugfixes
1 lines of code changed in:
MacGui: Make .m4v (Use iTunes Friendly Naming) default in preferences.
1 lines of code changed in:
MacGui: Presets - Add abliity to modify width and height on a preset independent of the currently loaded settings via repurposing the old "Current" picture size setting in the add new preset dialogue.
- Changes "Current" to "Custom".
- When Custom is selected two text fields for width and height appear, initially populated with the current picture settings which means that if not changed will behave as old "Current" settings used to.
- Editable fields means the preset can be save to pic dimensions other than what is setup for the current encode setup.
- For example you can have a dvd loaded up and then save a preset using say 1280 x 720 as max dims, even though the currently loaded source would not have allowed that before.
1429 lines of code changed in:
MacGui: Allow mono audio mixdown for LAME
- Patch by Rodeo. Thanks Rodeo !
10 lines of code changed in:
MacGui: Peak Framerate initial implementation
- Adds a checkbox below the fps drop down to allow selecting pfr as long as Same as Source is not selected.
- Checkbox is shows and hides based on the fps dropdown.
- Uses job->cfr = 2 instead of 1 to enable libhb's pfr mode.
111 lines of code changed in:
MacGui: Set the hud control panels origin based on the size of the actual preview window anchored at the bottom instead of setting it at the middle of the window.
- Should not block the actual preview as much.
- Move the origin setting code from -SetTitle into -displayPreview so that it is recalculated any time a new preview is generated, which includes changing encode size.
9 lines of code changed in:
x264 bump from r1592 to r1627
- Various bugfixes and enhancements
1 lines of code changed in:
Macgui: Sanity check multiple burned in vobsubs.
21 lines of code changed in:
MacGui: Enable soft vobsubs in mp4
- Initial patch by Rodeo. Thanks Rodeo!
- Enables soft vobsubsin macgui as per http://trac.handbrake.fr/changeset/3325
- Due to the fact that currently no quicktime based playback devices (yes, including computers and iphone/ipod/ipad) supports soft vobsubs, "Burned In" is on by default.
- Currently soft vobsubs are shown as supported by VLC (Lunettes) and Mplayer on the mac platform.
25 lines of code changed in:
Support for reading VOB subtitle tracks from file inputs initital implementation.
- Patch by davidfstr, Nice Work!
- Adds support for reading VOB subtitle tracks from file inputs.
Tested with:
- MKV VOB -> MKV VOB passthru.
- MKV VOB -> MKV VOB burned in.
VOB subtitle palette moved from per-title to per-track.
Discussion leading up to commit can be referenced here: http://forum.handbrake.fr/viewtopic.php?f=4&t=16267
238 lines of code changed in:
x264 bump from r1583 to r1592
- Faster cabac
- Various bugfixes and enhancements
- http://git.videolan.org/gitweb.cgi?p=x264.git;a=commit;h=95aacc4fb0ed4477a8c8b7cbf3f8c89229b03dc7
1 lines of code changed in:
MacGui: Live Preview HUD Overlay playback controller initial implementation
- Fixes current issue where a live preview with the display res larger than storage res would not show the built in QTKit control bar.
- Replaces the stock QTKit movie controller.
- Adds playback time code information to HUD display.
- Allows frame by frame scrubbing via keyboard arrow keys.
-- Methods exist for frame by frame step through but buttons are not on the HUD overlay yet.
Known Bugs:
- If movie is playing, first click on the scrubber bar can cause the movie to jump to beginning or end unless scrubber is held and dragged.
- Probably some others I haven't seen yet.
To Do (not that it ever will get done):
- Replace the current crappy stock buttons with some decent ones.
- Display accurate frame number hopefully though QTKit offers little documentation to get that exact info.
- Add a volume slider and remember the volume setting in the prefs.
- Add a subtitle control widget hopefully so that users can see what the subtitles would look like.
Other small changes include adding some tooltips to the hud overlay controller widgets to hopefully make it a bit more intuitive.
914 lines of code changed in:
(562 more)